CO₂ Incubator

Features:

Six-sided heating to ensure uniform temperature and fast heating
Infrared CO₂ sensor is high temperature-resistant and esnures accuracy
Heated door prevents condensation water
180°C high temperature dry heat sterilization
7-inch large touchscreen, real-time display of temperature, humidity, CO₂concentration, O₂concentration (optional), operation status bar, alarm, etc.
Parameter can be viewed as charts
The circulation fan accelerates the air circulation in the chamber so that the temperature and CO₂concentration can quickly recover to the previous level after door opening
Simple structure, compact, easy and quick disassembly and installation of components like shelves in the chamber
Equipped with HEPA filtration, highly effective filtration of microorganisms
Standard package is equipped with an inner door of a whole glass design and 3 shelves (Optional inner door with 3 segments and other inner door with 6 segments)
Stainless steel mirror inner chamber with rounded angle design makes it easy to clean
Comes with a water tray that is convenient to remove
Multiple alarms for safe operation: CO₂concentration alarm, high & low temperature alarm, door-open alarm, O₂concentration alarm (optional), humidity alarm, low water level alarm (optional)
The gas inlet outside the chamber has an easy-to-replace filter to filter the gas before entering the chamber
The temperature is PID-controlled

Model	ICO170 (Standard)
Heating Method	Direct heat + Air jacket
Capacity	170L
Input Voltage	110V/220V 50/60HZ
Power (standard configuration)	＜60W/H (37℃)
Power (high temperature sterilization)	＜1500W/H (180℃)
Convection	Fan
Heat Insulation	Foam
Display	7-inch touchscreen
Disinfect	180°C high temperature disinfection (HTD)
Chamber Humidity	95±5% R.H. (Relative Humidity)
Inner door material	Tempered glass
Access port (for cables etc.)	Inner diameter 30mm
Noise	< 50dB
Alarm	CO2 concentration alarm, high & low temperature alarm, door-opening alarm, humidity alarm, low water level alarm (optional), O2 concentration alarm (optional)
Data transfer	USB, Ethernet port
Upgrade method	Wireless or Cable
Inner dimensions	557x518x597mm
Outer dimensions	718x744x956mm
Weight (accessories excluded)	≤80KG
Temperature Control
Temperature range	Ambient+3°C~55°C (ambient: 5℃～35℃)
Temperature controller	PID
Temperature uniformity at 37°C	±0.3°C
Temperature stability at 37°C	±0.1°C
Temperature Recovery Time (recover to 37°C after 30s door-opening)	< 5 minutes
CO2 Control
CO2 sensor	Dual IR sensor
CO2 concentration range	0-20%
CO2 accuracy	±0.1 %
CO2 concentration recovery time (recover to 5% after 30s door-opening)	< 4 minutes
HEPA filter	Filter 99.97% of 0.22μm foreign particles
CO₂ connector	8mm tube (inner diameter)
CO₂ pressure	0.1MPa

Configurable Features
Door handle location	Left / Right
Wheel type	Optional Caster (size: 40mm)
Chamber Material	Standard: 304 Stainless Steel Optional: Copper
Number of shelves	Standard：3 Optional: 6 or 10
Number of inner doors	Standard: Unsegmented inner door Optional: 3 or 6-segmented inner doors
Humidification	Standard: Passive humidification water tray Optional: Active humidification external humidity reservoir
Water level monitor in the water tray	Optional
Tri-Gas (hypoxic culturing)	Optional

Product Category